background image

-  14  -

be performed by an authorised service centre.

CHUCK REPLACEMENT (fig.D)

1) Open the chuck jaws completely.

2) Insert a screwdriver in the front part of the 

chuck until reaching the safety screw.

3) Loosen the safety screw by turning it 

clockwise (left thread).

4) Position the friction on high torque (high 

number).

5) Now unlock the chuck with a sharp hit in 

an anti-clockwise direction and unscrew it 

manually.

To assemble the new chuck, follow the previous 

operations in the reverse order.

Carry out a trial run.

STORAGE

Clean the tool and all its accessories thoroughly 

(see Maintenance section). Protect the unpainted 

parts with protective oil and use the original 

packaging or case (where fitted) to protect it.

Keep the machine out of reach of children, in a 

stable and safe position. The place must be dry, 

free from dust, temperate and protected from 

direct sunlight. 

Keep children and unauthorised personnel out 

of the storage room.

DISPOSAL

In order to protect the environment, proceed 

according to the local laws in force. Contact the 

relevant authorities for more information.

When the machine is not longer useable or re-

pairable, deliver the machine and packaging to 

a recycling centre. Take out the batteries (where 

fitted) and dispose of them separately.

 Electric and electronic waste may contain 

substances that are dangerous for the envi-

ronment and for human health. For this reason 

they must never be disposed of together with do-

mestic waste, but collected separately in specific 

collection centres or returned to the retailer when 

similar new equipment has been purchased. The 

illegal disposal of such equipment may result in 

prosecution to the full extent of the law.

Battery disposal

: The batteries included in 

the equipment can be disposed of along with it. 

Do not throw the used batteries on the fire and 

do not dispose of them in the environment, but 

take them to special disposal centres. Do not 

dispose of them with domestic waste.

Summary of Contents for LI-HOME2V IMPACT212

















Reviews: