- 12 -
g
!
!
WARNING! The hammer drill is suitable ,
with the use of specific bits , drilling concrete
and brick, also can be used for small chiselling
with percussion only.
Is forbidden the use of materials hazardous
to health and environment with danger of fire
/ explosion.
Do not use on wood or metal. Any use other
than the one indicated is improper, dangerous
and will invalidate the warranty.
This instruction guide contains information
and as deemed necessary for the proper use,
the knowledge and the normal maintenance of
the tool. They do not report information on the
manufacturing techniques of various materials,
the user will find more news about books and
publications or by attending courses.
COMPONENTS
Refer to fig.A and the following , attached to
these instructions.
1 Dust protection
2 Spindle lock tip
3 Switch on / off
4 Auxiliary handle
5 Louvers engine
6 Reversing switch on / off
7 Selector percussion on / off
8 Pole limit switch
9 Main handle
10 Cap for greasing
11 Plug and power cord
12 Dust cap
SYMBOLS
Carefully observe the symbols in fig. B and
memorise their respective meanings. Correct
interpretation of the symbols allows a safer use
of the machine.
1 Model, technical data, manufacturing batch
number.
2 Double electric insulation.
3 CE marking
4 Electric and electronic waste may contain
potentially hazardous substances for the
environment and human health. It should
therefore not be disposed of with domestic
waste, but by means of differentiated
collection at specific centres or returned to
the vendor in the event of purchasing a new
identical appliance. The illegal disposal of
waste will result in sanctions.
INSTALLATION
!
!
WARNING! The manufacturer disclaims
any liability for any direct and/or indirect
damages caused by improper connection.
!
!
WARNING! Before you perform the fol-
lowing steps, make sure that the plug is
disconnected from the mains.
TRANSPORT
To carry the tool always use his or her briefcase
packaging (if any), and this will preserve it from
bumps, dust and moisture that may affect proper
operation.
During transport, remove the tip from the tool
spindle.
HANDLING
Firmly grasp the handle (pos.9) without acti-
vating the switch, keep it away from your body
after use and place it to the side without blinking .
STARTUP
In the place that you will use the power tool you
should consider:
- That the area is not damp and is sheltered from
the elements.
- Which is provided around a large working area
free from obstructions.
- That there is good lighting.
- Which is used in the vicinity of the main switch
with differential.
- That the fuel system is equipped with a groun-
ding in accordance with the rules (only if the
tool is in class I , that is equipped with a plug
with ground wire).
- That the ambient temperature is between 10°
and 35° C.
- That the environment is not in the atmosphere
of flammable/explosive.
Pull the tool and the components and visually
check their perfect integrity at this point, pro-
ceed to a thorough cleaning to remove from
the metal surfaces of any protective oils used
for the transport.
