4
Frame placement
Note: In this manual, a standard bicycle frame is used as an illustration used.
Carefully remove the frame from the box and place it on a soft background, such as a carpeted
floor or rug. This will reduce the chance of damage should the frame fall over during assembly.
Front wheel and fender
Did you order a front carrier? Then place the bars between the rings with the tab and the fender bar
and study the attachment.
A.
Remove the packaging from the fork and rotate the fork half a turn so that the arms point
forward. Take the front wheel and remove the packing material and fender.
B.
Unscrew the outer nuts on either side of the front wheel.
C.
Slide the wheel between the front fork and place the fender between the fork with the lip
at the back of the front fork.
D.
Place the mudguard bars next to the fork and washer with tab and retighten the nuts.
Screw the mudguard to the frame, with the attachment point of the mudguard
to the back of the front fork.