Send
Return
Series
Parallel
Send
Return
Save Menu
In the Save menu, you can save the changes you make to your e ects parameters, control information, and other
editable targets.
When pressing SAVE button, the interface will enter Save Menu (see picture 1 below), choose a slot via rotating and
pressing PARA. Press it to enter Rename Menu (see picture 2 below).
In the Rename Menu, you can manage your editing through PARA knob or 3 Quick Access Knobs.
Ÿ
Quick Access Knob 1: There are 4 types of characters to choose from: Uppercase, lowercase, numbers and symbols
(including space).
Ÿ
Quick Access Knob 2: Switch the position of the icon.
Ÿ
Quick Access Knob 3: Delete the icon targeted character.
Ÿ
When finishing, press SAVE to make sure you saved.
Ÿ
Click BACK to exit editing and return to the previous menu.
Remember to save after finishing the editing.
Global Settings
Global Settings, unlike previous ones, will a ect the whole status of the GP-200 and not change when the patch has
changed. All the settings will immediately function when editing is finished. There are input/output, USB Audio,
footswitch/EXP pedal, language and more in this menu, as well as factory reset.
9
Ÿ
FX Loop: E ects loop’s settings in the current selected patch. The send and return are stationed after the AMP
module. Parallel/Series illustrates how the e ects loop is connected to the signal chain.
◦
When set to Parallel, the returned signal from external e ect chains will mix with the AMP module and be sent to
the latter signals in the signal chain.
◦
When set to Series, internal e ect chain will be temporarily paused, only signals from external e ect chains will
be sent to the latter signals in the signal chain. In this situation, if the e ect loop interface is not connected to the
any other e ect unit, the GP-200 output will remain silent.
SAVE
Rotate PARA to move the cursor, press to select
SAVE
Use PARA or knob 1~3 to edit. Press SAVE button to save.
Knob
1
Knob
2
Knob
3
Letter
Cursor
Delete
Patch Setting
