Page 7
Проверил: Р.Ч./24.03.2015г
Insert two parts together, fix two parts by the screw.
N1F-QY-200S,N1F-QY-250S
Insert two parts together, fix two parts by the screw.
OPERATION
Switching the trimmer on:
1) Press and hold the safety lock-off button (5) and then press the start button (4) on the handle.
2) Release the safety lock-off button (5) again.
Switching the trimmer off:
Release the start button (4) on the handle.
Warning! Cutting elements continue to rotate for a moment after the motor is switched off.
Warning! Always switch off machine before placing it down.
Cutting (trimming)
Hold the trimmer in front of the body at an inclined angle and guide in a semicircular motion
around the standing position.
Good cutting performance up to a grass height of 15cm. Cut down higher grass in stages.
CATION
: Don’t bring the top of the wire spool housing into contact with the ground when the
machine is running.
If poor cutting performance is occurred.
1)
As the machine is running, tap the top of the wire spool housing on a hardware.
2)
The blade inside of the protective cover will cut the nylon thread to the correct length.
If the tool is vibrating.
