Проверил: Р.Ч./24.03.2015г
6
·
Use your charger only to charge batteries of the type supplied with your tool. Other batteries could
burst, causing personal injury and damage.
·
When charging is finished, unplug the charger from mains socket outlet and remove the cord from the
machine.
·
Never carry the charger by its cord or pull it to disconnect from the socket. Keep the cord away from
heat, oil and sharp edges.
·
Never attempt to charge non-rechargeable batteries.
·
The cord of charger is not changeable, do not continue to use if the cord is damaged.
·
Do not expose to water or rain, do not use it in wet condition.
·
Do not open or probe the charger.
·
Intended for indoor use only
Operating the power tool:
②
Blade-Fixed
②
Blade-Moving
③
The safety switch
④
On/Off switch
⑤
The lock-off button
⑥
Charging socket
⑦
Charging light
NOTE: Remove the blade guard first before operating the machine.
Switching On and Off
-
To start the machine, remove the blade guard first and then push the safety switch
③
to “ON”
position,
-
Pull the lock-off button
⑤
backward, then the moving blade
②
will move back until to the fully
open position.
-
Press the On/Off switch
④
at the same time. When the machine is running, maintain the On/Off
switch state. The moving blade will go forward until to the fully close position, and then stop.
-
To switch off the machine, release the On/Off switch
④，
Simultaneously do not release the
lock-off button
⑤
. The moving blade will move back until to the fully open position, and then
stop.
Additional safety instructions for garden pruner
·
THIS TOOL CAN CAUSE SERIOUS INJURIES. Read instructions carefully for the correct handling,
preparation, maintenance, starting and stopping of the tool. Be familiar with all controls and proper
use of the tool;
·
Only use the tool in daylight or good artificial light.
Do not expose the tool to rain or high humidity.
