Проверил: Р.Ч./24.03.2015г
Using the dust extraction connection (fig. A)
The dust extraction (9) together with an external vacuum cleaner takes care of the
dust extraction of the working surface.
Place the adapter (10) on the dust extraction connection (9).
Connect a vacuum cleaner to the machine.
Switching on and off (fig. A)
To switch on the machine press the on/off switch (1).
To switch off the machine, release the on/ off switch (1).
To switch the machine to continuous mode, you keep the on/off switch (1) fully
pressed and simultaneously press the lock button (2). And subsequently release
the on/off switch.
To switch off continuous mode, press the on/off switch (1) again.
When sawing metal always use a coolant (for example oil or water) to prevent the machine and work
piece from overheating.
Lubrication (fig. B)
Regularly apply a drop of oil to lubricate the guide roller (12).
CLEANING AND MAINTENANCE
The machine does not require any special maintenance.
Regularly clean the ventilation slots.
TECHNICAL DATA
Mains voltage
V
230
Mains frequency
Hz
50
Power input
W
600
No load speed
min
-1
0-3.000
Stroke length
mm
18
Max. cutting depth
wood
mm
65
steel
mm
6
Mitre angle
°
0-45
Weight
kg
2.0
ENVIRONMENT
Should your machine need replacement after extended use, do not put it in the domestic
waste but dispose of it in an environmentally safe way.
