Проверил: Р.Ч./24.03.2015г
For the best rough grinding results, hold the grinding Wheel at an angle of between 30° and
40° to the work piece surface and guide back and forth over the work piece in steady
movements
Do not use cutting discs for grinding working.
Cutting
Do not depress and vibrate to tool. Operate by properly press power for work piece. In
cutting process, the tool must operate reverse rotating direction. Otherwise there is danger of
losing control .
MAINTENANCE AND CLEANING
Before any work on the machine itself, pull the mains plug.
Changing carbon brushes
Check the carbon brushes regularly. Carbon brushes must be changed in pairs.
For safe and proper working, always keep the machine and the ventilation slots clean.
If the machine should happen to fail despite the care taken in manufacture and testing, repair
should be carried out by an authorized customer services agent for
Rtrmax power tools
.
