Valeport UV-SVP, Operating Manual

Page: 10 / 13

© 2018 Valeport Ltd
06508142b - UV-SVP
Page 10
Code Followed By Operation
#034 <CR> Returns the units serial number
#039 ;ModeValue<CR> Set mode without putting unit into run mode
Where
M1 = 1 Hz continuous output
M2 = 2 Hz continuous output
M4 = 4 Hz continuous output
M8 = 8 Hz continuous output
M16 = 16 Hz continuous output
#040 <CR> Read operating mode.
#042 ;ON or OFF Enable/disable leading separator
#043 <CR> Read leading separator (on or off)
#044 ;ON or OFF Enable/disable trailing separator
#045 <CR> Read trailing separator (on or off)
#059 ;baud_rate<CR> Sets the units baud rate
2400,4800,9600,19200,38400;57600;115200
#083 ;0 or 1 or 2 or 3 Setup the pressure output format
Where
0=not fitted, 1=PPPP.P, 2=PPP.PP, 3=PP.PPP
#084 <CR> Returns the set pressure range
#091 ;ON<CR> or ;OFF<CR> Sets startup mode.
OFF=No readings at startup,
ON=Readings at last rate at startup
#102 ;ON or OFF<CR> Sets 485 mode
#103 <CR> Sends 485 mode