Section 6 | Set Up
Page | 21
©
2021
– Valeport Ltd
The MiniCT sensor cannot currently be enabled via the on screen menus. The instrument must be
interrupted (See section 9) and the following commands used to enable/disable. A miniCT set up
menu will be available once the sensor is enabled.
#075
Reads back current miniCT status (0
– disabled, 1 – Enabled)
#074;0 Disables miniCT sensor
#074;1 Enables miniCT sensor
6.2.2 Sampling Set Up
The sampling set up of the instrument can be configured in this menu. Default burst modes can be selected
or a custom sampling mode can be user defined.
•
Sampling
➢
Burst
-
B1 - 30s/1 min
-
B2 - 40s/6 min
-
B3 - 40s/10min
-
B4 - 40s/15min
-
B5 - 60s/30min
➢
Continous
-
M1 - 1Hz
➢
Custom
-
Burst Interval Mins
•
Enter Value
-
Burst Duration Secs
•
Enter Value
6.2.3 Logging Set Up
Date/Time can be configured in this menu, and any existing data files erased from the unit.
•
Logging
➢
Set Time/Date
-
DD/MM/YYYY HH:MM:SS
➢
Clear Memory
-
Yes
-
No
