________________________________________________________________________________________________________________________________
Page 18
VALEO
– Product Line Valeo peiker Telematics - www.valeo.de
[12.]
Determined by the setting of bits WMC in the Watchdog control register
Table 2.8-1: Hardware characterization by functional block
Figure 2.8-1: Operating modes of the System Basis Chip UJA1131HW/3V3
Via SPI2 interface the MWCT1014S is able to sent commands to the SBC so that the SBC can change the
operating mode. The operating mode is selected via bits MC in the Mode Control register, see Table 2.8-2.
SPI address of the Mode Control register:
0x01
Table 2.8-2: Mode Control register
