________________________________________________________________________________________________________________________________
Page 16
VALEO
– Product Line Valeo peiker Telematics - www.valeo.de
The process for
wireless charging
is as follows:
1.
activate
2.
"Send_Clamp_15.ttl"
3.
" RepeatWlcStateRequest_SW_limiter_deaktive.ttl"
4.
Now place the
Chargeable Wireless Medium
onto the centre of the Wireless Charger
5.
During charging a light indicates a successful
6.
functional capability.
7.
This could take a few moments.
8.
During the test the LED should permanently
glow
9.
Deactivate
10.
"Activate_Sleep_Mode.ttl"
Note: a rubber mat should be placed between the
wireless charger and the wireless charging receiver
or the NFC-tag
A light indicates a successful functional capability;
this could take a few moments.
Click on navigation, open the Macro Display,
and click on
Finish
Click on navigation and open macro menu.
Click on
Activate_Sleep_Mode.ttl.
You can
now close all Windows and
remove the
Wireless Charger
