Valeo Speed/Visio, Instruction Manual

Page: 7 / 80

NP NP
Enter the function mode
Press both the and buttons to enter the function mode.
The first setting is the P-number of the wheels.
There are five P-number settings: P2, P4, P8, P16, P32. You can set
the P-number according to the model of your vehicle.
The speed/visio default setting is P4: if that is your choice, there is
no need to adjust.
The second setting is the speed fine-
adjustment
The speed/visio default setting is 160.
Press once to enter the speed fine-adjustment setting mode.
The display will be as in the picture on the left.
If the displayed speed value is higher
For example, the speed displayed on your dashboard is 60, but the
speed/visio displays 63. Please enter the speed fine-adjustment
setting, then adjust the value to 159~154.
Make the adjustment while matching the speed displayed on your
dashboard.
If the displayed speed is lower
For example, the speed displayed on your dashboard is 60,
but the speed/visio displays 57. Please enter the speed fine-
adjustment setting, then adjust the value to 159~164.
Make the adjustment while matching the speed displayed on
your dashboard.
The third setting is the speed
There are five ranges of speed: 10, 20, 30, 40, 50*
(* the default setting is 50, see Operating Manual No. 6).
If you wish to adjust the speeding value to 15, you should
enter the function mode.
Press the button three times to enter the first speed value
“10”, then press the ▲ button until “15” is displayed (if you
keep pressing the ▲▼ buttons, the number will change
rapidly). By pressing the button once, you can move to the
next set of speed value adjustments.
Complete and leave the function mode
Press to leave the function. The HUD will save all the
settings when you leave the function mode. All settings will
remain valid when the power is cut off.