3) beep&park
®
/vision
™
Settings
User Guide
3/4
1) Sensor Diagnostic Function :
•
Select reverse gear. The system tests the 4 rear sensors automatically:
If all of the sensors are working, the system beeps once.
If there is a problem with any of the sensors, the system
beeps 3 times.
•
In case of the detection of a problem, please ask an approved Auto
technician to check the sensors. Replacement sensors are available as
spare parts in case of a shock.
2) Screen Settings :
•
The screen can easily be removed from its support by simply
clicking it in and out.
We recommend you to remove the screen when
leaving vehicle unattended to avoid theft.
•
Screen settings buttons; located at the back of the display, enable you to
set image positioning, luminosity and contrast in all circumstances.
•
The rear camera Also works in poor light (< 2 lux), and even at night
3) Volume Settings :
•
The loudspeaker of beep&park
®
/vision™ is installed in the boot of your
car. It is fitted with a three positions volume switch:
I : mute
II : Normal
III : Loud
