Date de création: 11.12.95 par:LIE
Date de modif.: 10.09.03
Fichier DATA WORD IN
Fabrique SA
Doc. No.:
IN-VMCED
Page No.:
4 / 8
3. Installation
3.1 Important precautions for installation
♦
The purchaser must have the Multicooker installed at his own cost by an approved dealer,
in accordance with local regulations.
♦
The voltage, frequency and current should comply with the information given on the rating
plate on the Multicooker.
♦
The Multicooker should in any case be connected to safety earth by the lead. The Multi-
cooker is supplied with a hose cable 1,9 m in length (VMC - T = 1,4 m).
Conductor colours:
Earth :
yellow / green
Neutral:
blue
♦
Before connecting up, set switch [12] to « 0 »
♦
Never switch the Multicooker on without water, otherwise the elements can be damaged.
Before switching on, make sure there is water in the pan at least up to the "MIN" level
mark. Do not fill past the "MAX" mark to prevent overflow.
3.2 Connection of drainage tube
♦
The drainage tube fixed to the tap is normally at the back of the frame [9a]. It can also be
passed through the panel or through the front [9] to drain off into a receptacle.
3.3
Height of the Multicooker
♦
The height of the VMC is 850 mm as standard. It can be supplied at 800 or 900 mm (by
moving the feet) on request.
1
Cover
9
Drainage tube to front (Thread ¾")
2
Pan
9a
Drainage tube to rear (Thread ¾")
2a
Insulation
10
Connecting lead
6
Bottom of pan
11
Adjustable feet H =100 (50 or 150 as option)
7
Heating element
12
Setting switch 0-4-3-2-1
8
Drainage valve:
12a
Clear lamp
8a
- closed
13
Thermostat
8b
- open
13a
Yellow pilot lamp
30
Rating plate
