Introduction
Wipe-On Applicators
6
Operating Manual
10.23
1.2
Intended Use
The device is a state-of-the-art device which complies with the
recognized safety-related rules and regulations. Despite this, a danger
to life and limb of the user or third parties could arise and the device
or other property could be damaged while operating the device.
The device may only be used while in proper working order and for
the intended purpose. Users must be safe, aware of potential dangers
and must comply with the operating instructions. Faults, in particular
those which affect safety, must be remedied immediately.
The device is intended exclusively as a peripheral unit for the printing
systems of ILX series to apply suitable materials that have been
approved by the manufacturer. Any other or additional use is not
intended. The manufacturer/supplier is not liable for damage resulting
from misuse. Any misuse is at your own risk.
Intended used includes heeding the operating manual, including the
maintenance recommendations/regulations specified by the
manufacturer.
1.3
Safety Instructions
Couple the applicator to devices using extra low voltage only.
Before making or undoing connections, switch off all devices involved
(computer, printer, accessories etc.).
Operate the applicator in a dry environment only and do not get it wet
(sprayed water, mist etc.).
Do not operate the applicator in explosive atmosphere and not in
proximity of high voltage power lines.
Do not operate the applicator in explosive atmosphere and not in
proximity of high voltage power lines.
Maintenance and servicing work can only be carried out by trained
personnel.
Operating personnel must be trained by the operator on the basis of
the operating manual.
WARNING!
Danger of injury from rotating parts!
During operation, the rotating parts are freely
accessible. When working on the device wear tightly
fitting clothes and tie up long hair. Loosely hanging
pieces or long hair can get caught in parts of the device.
Never use highly inflammable consumables.
Summary of Contents for WMX 5001
