15
The following things should be checked before starting the dishwasher.
Syphon Connection
The waste conne ction must be at a he ight of be tween 40 cm (minimum) and 100 cm (maximum)
from the bottom of the dish. T he water drain ho se should b e fixed by a hose clip.
The content of this manual is very helpful to the users.
After installation, please make sure to keep this manual.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.
1
The dishwasher is level and fixed properly
2
The inlet valve is open
3
There is a leakage at the connections of the conducts
4
The wires are tightly connected
5
The power is switched on
6
The inlet and drain hoses are knotted
7
All packing materials and printings should be taken out from the dishwasher
Water Outlet
Connect the water drain hose. The drain hose mu st be correctly fitted to avoid water lea ks.
Ensure that the water inlet hose is not kinked or squashed.
If th e sink is 1000 higher from the floor, the excess water in hoses cann ot be drained dire ctly
into the sink. It will be necessary to drain excess w ater from hoses into a bo wl o r suitable
containe r that is held outside and lower th an the sink.
How to Drain Excess Water From Hoses
Summary of Contents for EDPR60SS
Page 1: ...EDPR60SS EDPR60WH...
