RE856
OPERATION MANUAL
AUS
1300 734 253 NZ 0800 734 253
16
4.
Power on the battery charger, the meter will display the charge current value with a plus sign and the battery
accumulated charging capacity ( ).
5.
Connect the battery load to the battery and use the DC current adaptor. Clamp the current transducer (jaw) around
the ‘+’ conductor.
Battery
Load
6.
The meter will display the discharge current value with a minus sign and the battery accumulated discharge capacity
( ).
7.
The battery charge/discharge remained capacity is: = -
Data Memory Function
Manual and Auto Data Memory Function (999 sets)
To clear the Memorised Data
When the memory is full, the memory number ‘999’ will appear on the display and memory function will be stopped.
1.
Rotate the resistance range switch to the OFF position to turn off
the meter.
2.
Press and hold the key then rotate the resistance range switch
to turn on. The display shows ‘Clr, YES, m, no’ symbols.
3.
Press
key to select ‘YES’ to clear the memorised data.
To Manual Memorised the Reading
Memorise the reading one by one to the memory by pressing the
key, and ‘NO.XXX ’ will appear on display for one sec. to indicate the
memorised location.
