Valen ENLiFEN PO4 Lithium Phosphate batteries are only to be used in conjunction with the below.
Please ensure all instructions are read prior to battery use and warnings are adhered to during the
installation and operation of these batteries. The lithium (LiFePO4) battery cells and modern digital
embedded, computerised technologies culminate in an energy storage solution that has many
unique advantages. This type of battery has no special ventilation or handling requirements. Since
the electrolyte in the battery is immobilised, the batteries are considered dry batteries and can be
handled and shipped accordingly.
PRECAUTIONS!
This battery has a high power output and, if used incorrectly, could hurt or kill you. Not all is known
about the hazards of the chemicals used and caution should be exercised should these become
exposed when a casing is compromised.
1. Although the unit is relatively light in weight, which is a feature of lithium batteries, the
battery is capable of delivering large amounts of energy.
2. Do not short positive and negative terminals.
3. Disconnect all power before attempting to install, remove or perform maintenance work.
4. Ensure the terminals are insulated before storing and transporting the batteries.
5. When on charge, float voltages must be measured. Be particularly careful because shorting a
battery at this time can cause severe equipment failure and personal harm.
6. Do not tamper with any parts of the battery including cover, terminal covers, etc.
7. Keep batteries clean and dry.
8. Do not use cleaners or solvents on any part of the battery.
9. Do not allow excessive dust to accumulate on the battery or cabling.
10. Keep battery connectors clean and tight. A loose connection can reduce battery standby
time and has been known to cause fire.
11. Multi-cell systems can attain lethal voltages. Remove all jewellery before working on batteries.
Cover all tools with appropriate electrical insulation to minimise the possibility of shorting a
battery during installation. Never lay tools or other metallic objects on batteries or near the
terminals.
12. Do not allow construction work near batteries.
13. Protect batteries from naked flame and avoid any impacts,
14. Always use a suitable lithium battery charger with the correct charging profile when charging
lithium batteries
CAUTION!
Shorting a battery can cause serious injury, fire or explosion. Do not attempt to work on a battery
unless you are familiar with battery installation procedures and have adequate safety information
Section 1
General Information
2
AUS
