CAPTESTER
OPERATION MANUAL
7
AUS
1300 734 253 NZ 0800 734 253
6 24V Charger Test
24V charger test
This option will allow you to watch/record the charging curve of a 24V
charger and charge 2x 12V batteries. You can view the Amps and Volts
that the charger produces over a set charge time. You need to connect
a 24V charger to the positive and negative charger plugs on the front of
the tester and also connect the 2 batteries. To connect 2 batteries to the
tester, you need to connect the red positive crocodile clip to the positive
of one battery and the black negative crocodile clip to the negative of
the other battery. Link the spare positive terminal of one battery and
spare negative terminal of the other with the link cable included in your
tester box. Press START/STOP to start the test, remember to ensure you
set a charge time in screen 4 and turn your charger on after you press
START.
7 Read Test Results
Read test result
The Captester will store your last 3 test results. Press START/STOP and
you can view each of the results. You will be able to see the Ah capacity
of the tested battery, % Pass or Fail of the battery and how many minutes
the test ran for. Press the DISPLAY CHANGE button to cycle through the
3 results. Test one is the last test that you completed. To exit this menu,
press START/STOP.
8 Meas. Data PC
Meas. Data PC
If a PC with Captester software AKKU is connected, you can send the
stored data of the tester to the PC. Ensure you select the software option
to download before you press START/STOP at this menu.
