28
FP14 Cartier - Installation and Operation Manual
In order to replace the glass, use the following procedure;
1- Remove the 12 glass retainers (B) and screws (A).
2- Remove the metal frames (C).
3- Remove the glass (D) from the door frame.
To install the new glass, follow the above steps in reverse order.
The
gasket
must
be
centred
on
the
edge
of
the
glass.
To
do
this
easily,
peel
back
a
section
of
the
paper
covering
the
adhesive
and
place
the
gasket
on
a
table
with
the
adhesive
side
up.
Stick
the
end
of
the
gasket
to
the
middle
of
one
edge,
then
press
the
edge
of
the
glass
down
onto
the
gasket,
taking
care
that
it
is
perfectly
centred
on
the
gasket.
Peel
off
more
of
the
backing
and
rotate
the
glass
and
press
the
next
section
onto
the
gasket.
Do
not
stretch
the
gasket
as
you
place
it.
Continue
until
you
get
to
the
start
and
trim
the
gasket
to
length.
Now
pinch
the
gasket
to
the
glass
in
a
U
shape,
all
around
the
glass.
Reinstall
the
glass,
being
careful
to
centre
the
glass
carefully
in
the
door.
Do
not
over
‐
tighten
the
screws.
Note
that
the
two
main
causes
of
broken
door
glass
are
uneven
placement
in
the
door
and
over
‐
tightening
of
retaining
screws.
