2
947763
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at
one’s own expense.
MOUNTING
The Digital Clocks have mounting holes predrilled in
the end and top of the housing, for use with the
included mounting bracket. Additionally, an
optional bridge adapter (model V-9914M-5) is
available for use with tile ceilings.
For ease of installation, the digital clock displays
should be removed from the housing before
mounting. Using Figure 2 as a guide, remove the
four screws holding the clock display to the
housing. Carefully pull the clock display away from
the housing, then remove the two wire connectors
from the back of the display. Using the same
process, remove the second clock display.
For end mounting, securely attach the mounting
bracket to the end of the clock housing using the
four screws and nuts provided. Refer to Figure 3
for details.
For top mounting with the included bracket, refer to
Figure 4. Securely attach the mounting bracket to
the top of the clock housing using the four screws
and nuts provided.
For top mounting using the optional V-9914M-5
ceiling bridge, use the mounting instructions
provided with the bridge
but do not cut the 8.5”
speaker
hole in the ceiling tile. Instead, cut a 1”
hole centered within the bridge opening for the
network and seismic cables. Using appropriate
screws and nuts (not provided), attach the clock
housing to the V-9914M-5 bridge with the ceiling tile
between the bridge and the clock housing. Refer to
Figure 5.
Feed the network cable and seismic cable (if used)
through the cutout in the clock housing before
attaching to the wall or ceiling. Position the clock
housing in the final mounting location and securely
attach to the wall or ceiling with appropriate
fasteners through the four mounting holes in the
bracket.
Reinstall the clock displays into the clock housing,
using Figure 2 as a guide. Insert the RJ-45
connector into the network connection on the clock
display board as shown in Figure 1, then slide the
display onto the housing and secure with the four
screws removed previously. Pull the signal wires
through the housing and reattach to the second
clock display. The connectors are color marked,
and must be reattached to the matching connector
on the clock display. Make sure all wires are inside
the housing, then slide the second clock display
onto the housing. Secure with the four screws
previously removed.
IMPORTANT SAFETY INFORMATION
CONSIGNES DE SÉCURITÉ IMPORTANTES
1. Read these instructions.
Lisez ces instructions.
2. Keep these instructions.
Conservez ces instructions.
3. Heed all warnings.
Respectez tous les avertissements.
4. Follow all instructions.
Suivez toutes les instructions.
5. Do not use this apparatus near water.
Ne pas utiliser cet appareil près de l'eau.
6. Clean only with dry cloth.
Nettoyer avec un chiffon sec.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Ne pas bloquer les ouvertures de ventilation. Installer formément aux instructions du
fabricant.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
Ne pas installer à proximité de sources de chaleur telles que radiateurs, registres de
chaleur, poêles ou autres appareils (y compris les amplificateurs) produisant de la chaleur.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If
the provided plug does not fit into your outlet consult an electrician for replacement of the
obsolete outlet.
Ne pas contourner le dispositif de sécurité de la fiche polarisée ou de mise à la terre. Une
fiche polarisée possède deux lames dont une plus large que l'autre. Une fiche de terre a
deux lames et une troisième broche de mise à la terre. La lame large et la troisième
broche sont fournies pour votre sécurité. Si la fiche fournie ne rentre pas dans votre prise,
veuillez consulter un électricien pour le remplacement de la prise obsolète.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
N'utilisez que des fixations / accessoires spécifiés par le fabricant.
12. Use only with the cart, stand, tripod, bracket or table specified
by the manufacturer or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Utilisez uniquement avec le chariot, stand, trépied, support ou table spécifié par le
fabricant ou vendu avec l'appareil. Quand un chariot est utilisé, Soyez prudent lorsque
vous déplacez l'ensemble chariot / appareil pour éviter des blessures dues au
renversement.
13. Unplug this apparatus during lightning storms or when unused for a long period of time.
Débranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilisé pendant une
longue période de temps.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way. Such as when the power supply cord or plug is
damaged, liquid has been spilled, objects have fallen into the apparatus or the
apparatus has been exposed to rain or moisture and does not operate normally or has
been dropped.
Confiez toute réparation à un personnel qualifié. Une réparation est nécessaire lorsque
l'appareil a été endommagé de quelque façon. Par exemple lorsque le cordon
d'alimentation ou la fiche est endommagé, du liquide a été renversé, si des objets sont
tombés dans l'appareil ou le appareil a été exposé à la pluie ou à l'humidité et ne
fonctionne pas normalement ou s'il est tombé.
