2
P3
P4
Speaker out
Network
-10dB Line
Level out
Mounting
The VIP-412-DF is designed for flush mounting on
a hollow surface or to a Valcom backbox. Using the
dimensions shown in Figure 2 as a guide, cut a hole
in the mounting surface large enough to allow
recessing the VIP-412-DF into the wall. Next, drill
mounting holes in the surface to align with the four
mounting holes in the grille. Using appropriate
anchors and screws (not included), mount the
VIP-412-DF to the surface. Alternatively, Valcom
backbox model VB-R19 is available for mounting
this model.
Network Connection
The VIP-412-DF has one RJ-45 network connector
on the rear panel. Use a standard Ethernet patch
cable and connect the VIP-412-DF to an Ethernet
switch. (See Figure 1)
-10 dB Line Level Out Connection
The -10dBm Line Level Out may be connected to
up to 40 Valcom Self Amplified Speakers in order to
provide additional sound reinforcement in an area.
Setup
Information specific to your application will need
to be programmed into the VIP-412-DF using a
computer. The PC used for programming should
be connected to the same subnet as the
VIP-412-DF. Setup will be done using the IP
Solutions Setup Tool. The IP Solutions Setup Tool
may be downloaded from the Valcom website at
www.valcom.com/vipsetuptool.
TECHNICAL ASSISTANCE
When trouble is reported, verify power is being
supplied to the unit and there are no broken
connections. If a spare unit is available, substitute
a spare unit for the suspected defective unit.
Assistance in troubleshooting is available from the
factory. Call (540) 563-2000 and press 1 for
Technical Support or via email at
[email protected]
When requesting assistance, you should include all
available information. It is strongly suggested that
you go to the web site and review the information
available at http://www.valcom.com.
Valcom equipment is not field repairable. Valcom,
Inc. maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the
unit clearly stating your company name, address,
phone number, contact person and the nature of
the problem. Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke, Va. 24019-5056
Figure 1. Connections
