background image

 

 

 

 

 

Issue 2 

 

947199 

 

 

     
 
 

 

V-2000A 

  INTEGRATED SINGLE ZONE PAGE CONTROL UNIT

 

 
 

INTRODUCTION

 

The V-2000A is an Integrated Single Zone Page 
Control Unit for use with any electronic key or PABX. 
 The control unit provides external power (12 Valcom 
power units) for powering Valcom One-way Amplified 
Speakers. 
 
These instructions contain the specifications and 
information necessary to install, operate and maintain 
the Integrated Single Zone Paging Control Unit. 

 
"WARNING:  To reduce the risk of fire or 
electric shock, do not expose this appliance to 
rain or moisture." 
 
"WARNING:  Shock Hazard - Do Not Open." 
 
"AVIS:  Risque de Choc Electrique ne pas 
Ouvrir." 
 
"PELIGRO:  Corriente Elecrica - No Abra."

 

 
 

SPECIFICATIONS

 

Purpose

 

• 

Provides telephone system access to a single 
zone of one-way paging 

 

Applications

 

• 

Electronic Key Systems  

• 

PABXs 

• 

1A2 Key Systems (400 type line card required) 

• 

Stand Alone Systems  

    
Refer to Figure 1 for a block diagram of a typical 
installation. 

 

Features

 

• 

Electronic key system line key access 

• 

PABX loop start trunk port access 

• 

Page port access 

• 

Switchable battery feed for loop start operation 

• 

RJ11 for Tip and Ring connections 

• 

Power on LED 

• 

Drives up to 150 Valcom one-way amplified 
speaker assemblies (Audio)  

• 

Background music input 

• 

Voice operated switch to mute mu sic during page 

• 

Screw terminals provided for all connections 

• 

UL Listed 

• 

Supplies 12 Valcom power units for powering 
Valcom one-way amplified speakers 

• 

May be used with 25 or 70 Volt amplifiers 

• 

AC powered 

• 

AC input fused at 0.5 Amp  

 

Capacity

 

• 

The V-2000A is a one-zone single talkpath unit. 

• 

Each V-2000A will drive up to 150 Valcom 
one-way amplified speaker assemblies (Audio) 
and provides 12 Valcom power units for powering 
the speaker amplifier assemblies.  The V-2000A 
can also be used to access 25 or 75 Volt 
conventional amplifiers. 

 

Reviews: