background image

wARNINGs

your child’s safety is your responsibility … 

Be sure to check that all clamps and buckles are securely fixed and in 

• 

place before use. 

Check all parts for breakage or fatigue before use. Discontinue 

• 

immediately if any part is found to be damaged or broken. 

The maximum weight of the toddler in this seat is 20 kg’s/ 45lbs. 

• 

ALWAYS be sure your stroller wheels are fully inflated before riding with 

• 

the toddler seat. Fully inflated tires provide the most stable platform and 

are less susceptible to punctures and blowouts. 

NEVER leave your child unattended while in any stroller or in this seat. 

• 

NEVER remove your hands from the stroller handle while your child is in 

• 

this seat. 

To avoid tipping ALwAys hold the stroller when your child is climbing into 

• 

the seat. 

NEVER leave the stroller at rest (parked) with a toddler in the seat. 

• 

NEVER use this seat if the child is unwilling to sit in it. 

• 

ALwAys be aware of your child’s position when sitting in the toddler 

• 

seat. Excessive leaning to one side or while the stroller is cornering, may 

cause the unit to become unstable. 

NEVER use this seat with a child under 6 months of age and/or is unable 

• 

to sit up unassisted. 

NEVER use this toddler seat with any other brand product. 

• 

Only use this toddler seat with the correct model VALCO Tri-mode Twin 

• 

stroller. 

ALwAys ensure that each child is clear of all moving parts when 

• 

adjusting the stroller. 

NEVER leave any child unattended in the stroller. 

• 

NEVER use on escalators or stairs. 

• 

when in the stroller each child must ALwAys wear the safety harness, 

• 

correctly fitted and adjusted, at all times. 

This product is intended for domestic use only. It is not intended for 

• 

commercial use.

In Australia/New Zealand

www.valco.com.au

www.valco.co.nz

In USA only

www.valcobaby.com

1 800 610 7850

In Canada

416 488 1900

Summary of Contents for Twin Toddler Seat









Reviews: