ION
Remove the stroller from the carton and
dispose of all packaging thoughtfully.
FIGURE A
1. Lift your stroller handle upward. You will
feel the stroller chassis opening.
FIGURE B
2. Continue unfolding the chassis until you
hear the chassis click open in the locked
position.
INsERTING REAR AxLE
FIGURE C
1. Align the plastic housings of the silver
brake section with the open tubes of the
rear of the stroller chassis.
2. Insert the housings over the open tubes
until the brake section locks securely into
place. IMPORTANT: Test that the brake
section is securely engaged onto the
stroller frame by pulling on it firmly.
INsERTING BUMPER BAR
FIGURE D
1. Align the plastic housings of the bumper
bar with the housing on the sides of the
stroller chassis.
2. slide the bumper bar into the housing
along the housing tracks until it locks into
place.
3. Repeat procedure for the second bar on
the other side of the stroller.
4. Pull the sides of the seat fabric, and the
crotch strap over the bumper bar and
snap into position.
5. To remove the bumper bar, unsnap the
crotch strap and the seat sides from the
bumper bar.
6. Lift both bumper bar latches found
on the underside of the each side
of the bumper bar housing, while
simultaneously lifting the bumper bar to
slide it free.
A
B
C
D
4
2
