28
29
EN
EN
Using the appliance
Using the appliance
B
B
Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
Description
Reason
Solution
Washing machine cannot
start up
Door is not closed properly.
Restart after the door is closed Check
if the clothes is stuck
Door can´t be opened
Washer’s safety protection
design is working
Disconnect the power, restart the
product
Water leakage
The connection between inlet
pipe or outlet hose is not tight
Check and fasten water pipes
Clean up outlet hose
Detergent residues in
the box
Detergent is dampened or
agglomerated
Clean and wipe the detergent box
Indicator or display does
not light
Disconnect the power PC board
or harness has connection
problem
Check if the power is shut down and
the power plug is connected correctly
Abnormal noise
Check if the fixing (bolts) have been
removed
Check it’s installed on a solid and level
floor
LED display models:
Description
Possible cause
Solution
Door is not closed properly
Restart after the door is closed
Check if the clothes is stuck
Water injecting problem while
washing
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Overtime water draining
Check the drain hose for blockage.
Water overflow
Restart the washer
Others
Please try again first, call up service
line if there are still troubles
NOTE
After the check, activate the appliance. If the problem occurs
or the display
shows other alarm codes again, contact the service.
Customer service
Spare part for your appliance are available for a minimum of 10 years. In case of questions
please contact our customer service at:
WARNING!
Risk of electric shock
• Never try repair an appliance which is defective of
presumed to be defective. You may put your own and
future users’ lives in danger.Only authorised specialists
are allowed to carry out this repair work.
• Improper repair will void the warranty and subsequent
damages can’t be recognized!
Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE
•
Unplug the appliance and close the water inlet tap.
•
Check, if the door and the detergent dispenser are closed properly.
•
Remove the water inlet pipe and the outlet hose from the house installations.
•
Let the water drain completely from the appliance (see “Maintenance Cleaning the
drain pump filter”)
•
Important: Re-install the 4 transport bolts in the back of the appliance.
•
This appliance is heavy. Transport with care. Never hold any protruding part of the
machine when lifting. The machine door cannot be used as a handle.
Summary of Contents for WT 612 D W566
Page 2: ...1 2 3 4 5 6 7 8 9...
