VALBERG IH 4 TB2FZS 007C, Instructions For Use Manual

Page: 21 / 248

14 EN
Using the appliance
B
Installation
Selection of installation equipment
• Cut out the work surface according to the sizes shown in the drawing.
• For the purpose of installation and use, a minimum of 5 cm space shall be preserved
around the hole.
• Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
and insulated work surface material (Wood and similar fibrous or hygroscopic material shall
not be used as work surface material unless impregnated) to avoid the electrical shock and
larger deformation caused by the heat radiation from the hotplate. As shown below:
NOTE
The safety distance between the sides of the hob and the
inner surfaces of the worktop should be at least 3mm.
L
(mm)
W
(mm)
H
(mm)
P
(mm)
A
(mm)
B
(mm)
X
(mm)
F
(mm)
590 520 62 58
560+4
+1
490+4
+1
50 min. 3 min.
Under any circumstances, make sure the Induction cooker hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the induction cooker hob is in good work state. As
shown below.
Min.3mm
F
B
X
X
A
X
X
L
W
H P