VALBERG FBI 14S40 B KAD929C, Instructions For Use Manual

Page: 55 / 227

48 EN
Useful information
C
Troubleshooting tips
Before calling for service
Reviewing the charts on the following pages may save you from calling for service
Problem Possible causes What to do
Dishwasher doesn’t start
Fuse blown, or the circuit
break tripped.
• Replace fuse or reset
circuit breaker.
• Remove any other
appliances sharing the
same circuit with the
dishwasher.
Power supply is not turned
on.
• Make sure the dishwasher
is turned on and the door is
closed securely.
• Make sure the power cord
is properly plugged into the
wall socket.
Water pressure is low
• Check that the water
supply is connected
properly and the water is
turned on.
Door of dishwasher not
properly closed.
• Make sure to close the
door properly and latch it.
Water not pumped from
dishwasher
Twisted or trapped drain
hose.
• Check the drain hose.
Filter clogged. • Check the filter system.
Kitchen sink clogged.
• Check the kitchen sink
to make sure it is draining
well. If the problem is
the kitchen sink that is
not draining, you may
need a plumber rather
than a serviceman for
dishwashers.