VALBERG CYCLONIC-H2, Instructions For Use Manual

Page: 18 / 42

17 EN
Assembly/Disassembly
WARNING: Moving Parts!
• Always turn off the vacuum before attaching or removing parts.
To assemble:
Push the 2-in-1 nozzle into the handheld vacuum until it is firmly secured into place.
• Crevice tool – Use to remove dirt from tight or hard-to-reach corners.
• Brush tool – Use the bristle brush to remove stubborn dirt from furniture, blinds,
floors and carpets.
To use the brush, press the button and slide the brush downwards. To use the crevice
tool once more, press the button and slide the brush upwards to reveal the crevice tool.
To disassemble:
• Make sure the unit is turned off and the USB charging cable is unplugged.
• Pull the 2-in-1 nozzle off the vacuum.
Operation
• Once the unit is assembled and charged, it is ready for use.
1. Press the Power button to turn on the vacuum. The battery LED indicator will light up.
2. To turn off the vacuum, press the Power button again.
NOTE: For best performance, empty the dust cup when the MAX mark indicates
that it is full or after each use (as shown in the Cleaning and maintenance section).
Product usage
B