VALBERG 15S39 D S701T, Instructions For Use Manual

Page: 14 / 152

7 EN
Using the appliance
B
Drain hose
The drain hose can be connected either directly to a fixed drain
or to the special connection under the sink. Using a special
elbow pipe (if available), the dishwasher can be emptied directly
into the sink by hanging the elbow pipe on the edge of the sink.
This connection must be at least 50 cm and no more than 110
cm above ground level.
Warning
When a drain hose longer than 4 m is used, the utensils may remain dirty.
In this case, our company will not accept any responsibility.
0.5 - 1.1 m
0.5 - 1.1 m
Power supply connection
The earthed socket of your dishwasher must be connected to an earthed socket with the
correct voltage and current (in accordance with current standards). If your home does not have
an earthed installation, have this installed by a qualified electrician. In case of use without
earthing, our company will not be liable for any loss of use that may occur.
The plug of this appliance may have a 13 A fuse depending on the country. (e.g. the UK.) (e.g.
the UK, Saoudi Arabia)
Your dishwasher is configured to operate on 220-240 V. If your home is 110 V, insert a 110/220
V - 3,000 W transformer. The dishwasher must be unplugged during positioning.
Always use the covered plug supplied with the appliance. At low voltage, your dishwasher is
less efficient.
If the power cable is damaged, it must be replaced by the manufacturer, its after-sales
department or a similarly qualified person to avoid any danger. Otherwise, accidents may
happen.
max 110 cm
min 50 cm
min 4 cm