VAL VLP-2430-4, Operation Manual, Page: 4 / 10

Rev. 1.1
５．Dimensions and Functions
① Power switch Power on at “I” side
② Intensity Volume Knob For digital control
③ Digital Display Display the setting of the light intensity or the setting of the lighting mode.
④ Channel Selection Switch Selects CH1, CH2, CH3, CH4.
⑤ Channel Indicators
CH1 lit: Lit when changing settings for Light Unit connected to output connector CH1.
CH2 lit: Lit when changing settings for Light Unit connected to output connector CH2.
CH3 lit: Lit when changing settings for Light Unit connected to output connector CH3.
CH4 lit: Lit when changing settings for Light Unit connected to output connector CH4.
⑥ Internal/External Mode Selector Selects internal (INT.) or external (EXT.) control mode.
⑦ Normal/Strobe Mode Selector Selects normal (NOR.) or strobe (STR.) control mode.
⑧ Trigger Logic Switch Selects the logic of the trigger signal.
⑨ External Control Connector For external control with RS-232C communications.
⑩ External Trigger Input Connector
Inputs the ON/OFF signal for ON/OFF Mode.
Inputs the trigger signal for Strobe Mode.
⑪ Output Connectors Supply power to the Light Units.
⑫ AC Inlet Connects the power source to the Control Unit.
120
120
80
88
4
5
.5
3
9
.5
6
.5