Rev. 1.2
１．Safety regulations
WARNING
Do not open the chassis to avoid electric shock.
High-voltage parts are inside.
Use appropriate DC power only.
1) DC12V：Input terminal board of the controller M3 terminal board.
: Crimp Terminal on the connected side M3 round crimp terminal.
Earth ground the product.
If you do not, it may cause an electric shock when you touch both a part with earthing potential
and the power supply at the same time.
Whenever trouble occurs, such as smoke, smell, noise or abnormal heat, stop the operation
immediately and turn off the power and unplug the power cord.
Use only LED lighting unit made by VS Technology (Thailand) Co., Ltd.
If you use with other lighting unit, over current may cause a fire or heat.
CAUTION
1. USE the extension or remote cables 3m maximum to prevent power drop by voltage reduction or malfunction
by noise.
2.
Installation of the product
1) Place horizontally in a well ventilated space on the rubber feet at the bottom of the unit.
2) Do not topple or lay on its side.
3) Do not put on unstable or vibrational place.
4) Do not use in environment with humidity, dusty, high temperature or fire.
5) Keep liquids away.
3.
Do not look at the LED directly.
If you see the LED long time, your eyes may be damaged.
4.
Cleaning
Use wet cloth twisted well.
Never use inflammable liquids such as alcohol, benzene or thinner.
Turn off the power and unplug the cord from the outlet while cleaning to avoid any injury or damage
of the unit.
5.
Dispose the product conforming to the law in the region where the product is used.