12
Using the Adjustment Controls
1. If the lamp is not on, click the
Lamp On
button.
NOTE: The lamp will automatically turn off in
about 45 seconds. If this occurs, click the
Lamp On button again.
2. Zoom in as tight to the subject as your image
composition will allow.
3. Use the Brighter/Darker buttons
,
in the
main window to adjust the exposure level.
4.
Adjust the
Red
and
Blue
spin controls for proper
skin tones (
Only available on current
hardware
)
If the image is yellow increase
Blue
and
decrease
Red
If the image is green increase
Blue
and increase
Red
5. Adjust the
Cam Sharp
control for the desired
sharpness
A
value between 6 and 9
is recommended. If
the value is too high the image will look edgy and
over enhanced. If the value is too low the image
will look soft and unfocused.
6. Adjust the
Color
scroll bar for the proper color
intensity. If the color intensity it too high the card
printer might distort the color rendition. Usually a
value between –30 and 0 will produce good
results
7. Adjust the
Flesh Tone
scroll control(
Only
available on older cameras)
for proper color
balance. In conjunction with this control adjust
the
Color Balance
spin control to optimize the
