TROUBLESHOOTING
If water stays cold and pilot light is off:
1-
Check the voltage
2-
Check circuit breaker, main fuses and replace if necessary
3-
Check the “High Temperature Cut off Switch with Manual Reset’’ (refer to the
physical diagram).
4-
Check thermostat.
5-
For the 600 volts water-heater, checks the circuit breaker located in inside the
control box and if necessary, replace it.
If water does not heat as wanted and pilot light is on:
1-
Check voltage
2-
Check thermostat
3-
Check heating elements. You should obtain the following readings in regards
of elements type:
Electrical characteristic of Heating Elements
TYPE
Power
(KW)
Voltage L-L
(V)
Line
current
(A)
Resistance
(Element
disconnnected)
240v-1ph
3,0
240
12,5
19,0
208v-1ph
3,0
208
8,3
14,4
600v-3ph
6,0
600
5,8
5,7
600v-3ph
9,0
600
8,7
8,6
