Vakoss VC-630, Instruction Manual

Page: 5 / 18

4
ENG
4.Camera conversion: When the camera is in standby mode press the “menu”
button and enter the camera settings interface. Press camera A and the images
will appear on the left hand screen, press camera B and the images will appear
on the right hand screen. The default setting is cameras A+B, where the images
appear on both screens.
Recording Options Setting s:
Recording Options Settings: When the camera is in standby mode press the
“menu” button and enter the recording options settings. Next press “up” or
“down” to select which setting you want, then press the “ok” button to confirm
it. Press the “menu” button to return to the recording options settings interface.
5. Taking Photographs: When the camera is in standby mode, press and hold
“mode” for a few seconds to change the camera to photograph mode. There
will be an A icon in the upper right hand corner of the screen, and you will have
entered photograph mode. To prepare the camera to take a photograph you
can press “up” and “down” to zoom in and out, then press “ok” to take a picture,
the images will be stored on the card.
Photograph Settings:
When you are in photograph mode, press the “menu” button to enter the
photograph mode settings options interface. Next press “up” and down” to
choose the setting you want and press “ok” to confirm it. Press the “menu”
button to return to the photograph settings options interface.
1 Size VGA/QVGA
2 Camera Camera A
，
Camera B
，
Camera A+B
3 Time Label Off/Date/Time and Date
4 Recording Time 1 Minute/2 Minutes/3 Minutes/ 5 Minutes/10 Minutes/15 Minutes