• If you replace a probe with a new one that has the same measurement parameters as the
removed probe, the transmitter will continue to show those measurements once it detects
the new probe. Outputs will give an error notification, which will disappear when the new
probe is detected.
• If you replace a probe with a new one that has different measurement parameters as the
removed probe, you need to reconfigure the measurement parameters and outputs for
the new probe.
More information
‣
9.3 Updating transmitter software version
You can update the transmitter software through the web interface.
You need
Administrator
user rights for this task.
Before you start:
• Make sure that you have the software update file locally on your computer. You can
download the file from
https://www.vaisala.com/en/lp/indigo500-software-download
.
• If your transmitter does not have a network connection, make sure that both the
transmitter and the computer connected to it are set to use static network settings.
1. Connect to the web interface.
2. Log in to the web interface as an administrator user.
Chapter 9 – Maintenance and troubleshooting
97
Summary of Contents for Indigo500 Series
Page 1: ...M212287EN N User Guide Indigo500 Series Transmitters Indigo510 Indigo520...
Page 122: ......
Page 123: ......
Page 124: ...www vaisala com...
