2.4.1 Graph mode
Figure 4 Transmitter display in graph mode
You can set the transmitter display to show the connected probe's measurement data as
graphs. The measurement parameters can be configured with the Insight PC software.
You can switch between the numerical and graph views shown on the display with
the push button on the front of the transmitter.
2.4.2 LED states in transmitter with no display
In the display model, notifications, warnings and other messages are shown on the display as
text rows and indicator graphics. In the LED indicator model, the status of the transmitter and
probe is indicated by LED color and whether the LED blinks. To view more information on the
notifications, connect the transmitter to Insight PC software.
The LED states are described in
Table 2 LED states in transmitter with no display
LED color
Meaning
Not lit
Power off.
Green, fast blinking
Starting up.
Green, not blinking
Power on, normal measurement.
Green, slow blinking
Notification or warning, normal measurement.
Connect to Insight to view status information
and configure.
Indigo201 User Guide
M212842EN-B
12
