Vaisala AviMet WID511, User Manual

Page: 75 / 102

5. In the COM port settings, depending on the data type:
• Press the arrow to open the list and select from the list of options.
• Press the data field to open the typing pad. When finished, press
OK .
Connection type
Select the RS connection type from the available options, for example,
RS
‑
485
2
‑
w
for 2
‑
wire RS
‑
485.
Speed (baud)
Bit rate setting for the serial port (default = 4800 ).
Data bits
Data bit setting for the serial port (default = 8 ).
Parity
Parity settings for the serial port (default =
None
).
Stop bits
Stop bit setting for the serial port (default = 1 ).
Delay before (m/s)
The turnaround delay of the RS
‑
485 driver before sending data.
Delay after (m/s)
The turnaround delay of the RS
‑
485 driver after sending data.
6. To save the changes, press Apply .
The changes are valid only after pressing Apply .
Chapter 7 – Advanced settings in Maintenance mode
73