background image

A COPY OF THE ‘OPERATIONAL WARNINGS AND SAFETY INSTRUCTIONS’ IS TO BE KEPT 
WITH THE VEHICLE AT ALL TIMES. 

 

3.DISCLAIMER AND LIMITATION OF WARRANTIES . 

 (A) 

EXCEPT AS OTHERWISE CONTAINED HEREIN

, the 

PRODUCTS

 and  related  documentation  are  provided  to  you, “AS  IS”. IN  NO 

EVENT SHALL VAIS  BE LIABLE FOR 

ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING WITHOUT LIMITATION, 

COMPENSATORY,  INCIDENTAL,  INDIRECT ,  SPECIAL,  CONSEQUENTIAL,  OR  EXEMPLARY  DAMAGES,  LOST  PROFITS,  LOST 

SALES OR BUSINESS, EXPENDITURES,  INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF 

ANY  GOODWILL,  OR  DAMAGES.  THE  TERM  ‘INCIDENTAL  DAMAGES’  REFERS  TO  THE  EXPENSES  OF  TRANSPORTING  THE 

PRODUCTS TO THE VAIS SERVICE CENTER, LOSS OF THE END-USERS [ORIGINAL PURCHASER’S] TIME, LOSS OF THE USE OF 

THE PRODUCT, BUS FARES, CAR RENTALS OR OTHER COSTS  RELATED TO THE CARE AND CUSTODY OF THE PRODUCT. THE 

TERM  ‘CONSEQUENTIAL  DAMAGES’  REFERS  TO  THE  COST  OF

  REPAIRING  OR  REPLACING 

OTHER  PROPERTY,  WHICH  IS 

DAMAGED  WHEN  THIS  PRODUCT  DOES  NOT  WORK  PROPERLY.)  RESULTING  FROM  THE  USE  OR  INABILITY  TO  USE  THE 

PRODUCTS,  INCLUDING  ANY  DAMAGES  INCURRED  DUE  TO  THE  NEGLIGENT  OPERATION  OF  A  MOTOR  VEHICLE,  IN 

CONJUNCTION WITH THE USE OF SAID PRODUCTS. THE END-USER ACKNOWLEDGES ITS RESPONSIBILITY FOR THE USE OF 

THE PRODUCT. THE ADDITION OF VAIS PRODUCTS AND ANY  AFTER-MARKET EQUIPMENT MAY ENHANCE THE VALUE OF A 

VEHICLE OR CAUSE A THIRD-PARTY TO  ILLEGALLY ATTEMPT TO REMOVE THE  PRODUCTS AND AFTER-MARKET EQUIPMENT. 

VAIS DISCLAIMS ANY LIABILITY RELATE D TO SUCH THEFT AND POTENTIAL DAMAGE  TO PROPERTY.IT IS THE END-USERS 

RESPONSIBILITY TO PROTECT ITS OWN PROPERTY

THE END-USER FURTHER ACKNOWLEDGES THAT THE OPERATIO N OF A MOTOR VEHICLE IS AN INHERENTLY DANGEROUS 

ACTIVITY, AND BY ITS USE OF VAIS’S PRODUCTS, ACKNOWLEDG ES THAT THE PRODUCTS ARE REMOTELY RELATED TO SAID 

MOTOR VEHICLE OPERATION, AND THUS ANY  DAMAGES CAUSED TO THE DRIVER OF THE VEHICLE, THE VEHICLE ITSELF OR 

ANY THIRD-PARTY AND ITS PROPERTY IS NO T THE RESPONSIBILITY OF VAIS, ITS AGENTS OR ITS PRINCIPALS AND IS THE 

SOLE RESPONSIBILITY OF THE DRIVER OF SAID VEHICLE. 

YOU, THE END-USER, OR ANY OTHER DRIVER OF THE VEHICLE, IS SOLELY RESPONS IBLE FOR THE SAFE OPERATION OF THE 
VEHICLE AND THE SAFETY OF BOTH YOU AND THE PASSENGERS . FOR SAFETY PURPOSES, THE PRODUCT SHOULD NOT BE 
USED FOR THE DRIVER’S ENTERTAINMENT,  WHILE THE VEHICLE IS BEING DRIVEN. SUCH USE COULD BE A DISTRACTION TO 
THE DRIVER, WHICH COULD CAUSE AN ACCIDENT LEADING TO SER IOUS INJURY OR DEATH. IF YOU, THE END-USER ALLOW 
ANOTHER PERSON TO USE THE VEHICLE, IT IS YOUR RESPONSIBILITY TO THOROUGHLY BRIEF THAT OTHER USER, ON THE 
SAFETY REQUIREMENTS FOR OPERATING THE VEHICLE AND THE PR ODUCTS INSTALLED THEREIN. 

 (B) SAID DISCLAIMERS SHALL APPLY TO THE USE OF SAID PR ODUCTS, EVEN IF VAIS HAS BEEN INFORMED OF, KNEW OF, OR 
SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION  APPLIES TO ALL CAUSES OF ACTION IN THE 
AGGREGATE,  INCLUDING  WITHOUT  LIMITATION:  BREACH  OF  CONTRACT,  BREACH  OF  WARRANT Y,  NEGLIGENCE,  STRICT 
LIABILITY,  MISREPRESENTATION  AND  OTHER  TORTS.  IF  VAIS’S  WARRANTY  DISCLAIMER  OR  LIMITATION  OF  LIABILITY  SET 
FORTH IN THIS AGREEMENT SHALL, OR  FOR ANY REASON WHATSOEVER, BE HELD  UNENFORCEABLE OR INAPPLICABLE, YOU 
AND ANY OTHER END USER AGREE THAT VAI S’S LIABILITY SHALL NOT EXCEED (50%) OF THE PRICE PAID FOR THE ENCLOSED 
VAIS PRODUCT. 

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not 
apply to you. This Warranty Disclaimer and Limitation of Liability  shall not be applicable to the extent that any federal, state or local law, 
which cannot be preempted, prohibits any provision of this Warranty.    

 (C) Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a  video screen 
within the sight of the Driver. If you have purchased such a product, you should use the product only in locations where it is  legal to do so, 
and if you do use the product, set up the screen only where it may be visible to passengers only. Although VAIS strongly recomm ends that 
Products  not  be  used  while  the  vehicle  is  in  motion,  it  is  your  responsibility  to  determine  whether  the  product  can  be  used  in any  given 
location. Any use of the PRODUCTS where it is illegal to do so, may be used against you as evidence of negligence in the event of an auto 
accident or other traffic infraction.  

 

4. THIRTY (30)- DAY MONEY BACK WARRANTY ONLY IF PURCHASED DIRECT FROM 

VAIS.   

Any Product purchased directly from VAIS, referencing a 

Return Authorization Number

 (

RAN

)

 

during the Thirty-(30) day period following 

shipment by VAIS, may be returned for a full refund of the purchase price actually paid, only if you have received damaged, def ective or 
incorrectly shipped merchandise.  The RAN number may be obtained from 

VAIS’s Customer Support at (720) 733-2348

, and is valid for 

only thirty- (30) days from its issuance. Said RAN must be noted on the outside of the returned PRODUCTS’ packaging. The PRODUCTS 
must be returned in its original packaging, intact, without any evidence of tampering with the PRODUCTS or physical damage caused by the 
Customer (End-User).  

 

WE WOULD STRONGLY RECOMMEND THAT THE ITEM BE SHIPPED INSURED, SINCE THE RISK OF LOSS DURING SHIPPING IS 

WITH  THE  END-USER

.  Re-stocking  Fees  may  apply.  Damage  Fees  if  deemed  caused  by  the  End-User  may  apply.  SHIPPING  AND 

HANDLING OF THE END-USER IS NOT REFUNDABLE AND MUST  BE PREPAID, FOR THIS WARRANTY TO BE APPLICABLE. END-
USER SHALL ASSUME ALL RISK OF LOSS FOR  THE SHIPPING OF THE PRODUCTS TO VAIS. 

PLEASE ALLOW UP TO EIGHT (8) 

WEEKS FOR VAIS TO CREDIT YOUR ACCOUNT

.   

19

Summary of Contents for SoundLinQ SL3x























Reviews: