Set-up
28
Operating and installation instructions 0020248975_01
5
i
Note
Ensure that no cables or pipes are
routed within the wall.
>
Use the mounting plate to mark two of
the drill holes located diagonally oppo-
site to each other.
i
Note
Ensure that the arrow on the front
of the mounting plate is pointing
upwards.
>
If required, use the holes
(2)
for the
installation on a flush-mounted box.
>
Drill the pre-marked holes (5 mm dia-
meter).
>
Install the mounting plate to the wall
using the rawl plugs and screws sup-
plied.
>
Push the room thermostat and clip-on
frame
(3)
onto the mounting plate so
that the clips for the mounting plate
