background image

2 Safety

2.1 

Safety and warning information

When installing the electronicVED plus electric instanta-
neous water heater, you must observe the general safety 
instructions and warning notes that appear before all of 
the actions.

2.1.1 

Classification of action-related warnings

The action-related warnings are classified in accordance 
with the severity of the possible danger using the follow-
ing warning signs and signal words:

Warning 
 symbol

Signal word

Explanation

a

Danger!

Imminent danger to life 
or risk of severe 
personal injury

e

Danger!

Risk of death from 
electric shock

a

Warning.

Risk of minor personal 
injury

b

Caution.

Risk of material or environ-
mental damage

Tab. 2.1 Meaning of warning symbols and signal words

2.2 Intended 

use

Vaillant electronicVED plus electric instantaneous water 
heaters have been constructed using state-of-the-art 
technology in accordance with the recognised safety 
rules and regulations. Nevertheless, there is still a risk of 
death or serious injury to the user or others or of dam-
age to the unit and other property in the event of 
improper use or use for which the unit is not intended.
This unit is not designed to be used by persons (includ-
ing children) with limited physical, mental or sensory 
capabilities or by persons who do not have enough expe-
rience and/or knowledge, unless they are supervised by 
a person who is responsible for their safety or have 
been instructed by him/her about how to use the unit.
Children must be supervised to ensure that they do not 
play with the unit. 
Vaillant electronicVED plus electric instantaneous water 
heaters must only be used to heat up drinking water. 
Vaillant electronicVED plus electric instantaneous water 
heaters are suitable for use only in an enclosed, frost-
free room in a domestic environment. Vaillant 
 electronicVED plus electric instantaneous water heaters 
are not suitable for use in secondary returns.
Any other use, or use beyond that specified, shall be 
considered improper use. Any direct commercial or 
industrial use is also deemed to be improper. The manu-
facturer/supplier is not liable for any claims or damage 
resulting from improper use. The user alone bears the 
risk. Intended use includes observance of the operating 
and installation instructions and all 
other applicable documents, as well as compliance with 
the maintenance and inspection conditions.

2.3 

General safety information

Installation, start-up, maintenance and repair

All work involved in the installation, initial start-up, main-
tenance and repair of the electronicVED plus electric 
instantaneous water heater must only be carried out by 
an approved heating specialist company, who also 
assumes the responsibility for installing the unit prop-
erly and commissioning it for the first time. The 
 electronicVED plus electric instantaneous water heater 
must be installed in strict compliance with these installa-
tion instructions. 

Risk of death from electric shock from live lines and 
connections!

During all work on the open unit, particularly on electri-
cal lines and connections, there is a risk of death from 
electric shock.

 

>

When working on the open unit, interrupt the power 
supply. The unit must be de-energised.

 

>

Check that the unit is de-energised.

 

>

Ensure that the power cannot be restored inadvert-
ently to the unit while you are working on it.

2 Safety

4

Installation instructions for the electronicVED plus electric instantaneous water heater 0020149585_00

 

a

 

a

Summary of Contents for electronicVED plus









































Reviews: