Safety 1
0020239016_01 ecoTEC plus Operating instructions
5
1.3.5 Risk of death due to
explosive and flammable
materials
▶
Do not use or store explosive
or flammable materials (e.g.
petrol, paper, paint) in the in-
stallation room of the product.
1.3.6 Risk of death due to lack
of safety devices
A lack of safety devices (e.g.
expansion relief valve, expan-
sion vessel) can lead to poten-
tially fatal scalding and other
injuries, e.g. due to explosions.
▶
Ask a competent person
to explain how the safety
devices work and where they
are located.
1.3.7 Risk of death due
to changes to the
product or the product
environment
▶
Never remove, bridge or
block the safety devices.
▶
Do not tamper with any of the
safety devices.
▶
Do not damage or remove
any seals on components.
▶
Do not make any changes:
–
The product itself
–
to the gas, air, water and
electricity supplies
–
to the entire flue gas install-
ation
–
to the entire condensate
drain system
–
to the expansion relief valve
–
to the drain pipework
–
to constructional condi-
tions that may affect the
operational reliability of the
product
1.3.8 Risk of corrosion
damage due to
unsuitable combustion
and room air
Sprays, solvents, chlorinated
cleaning agents, paint, adhes-
ives, ammonia compounds,
dust or similar substances may
lead to corrosion on the product
and in the air/flue pipe.
▶
Ensure that the supply of
combustion air is always free
of fluorine, chlorine, sulphur,
dust, etc.
▶
Ensure that no chemical sub-
stances are stored at the in-
stallation site.
1.3.9 Cabinet-type casing
Enclosing the product in cab-
inet-type casing requires
compliance with the applicable
design instructions.
▶
Do not fit the casing on the
product yourself.
▶
If you require cabinet-type
casing for the product, consult