background image

4

Operating instructions ecoTEC pro 0020129673_00 

a

Safety

a

2

2 Safety

2.1 

Safety and warning information

 

>

When operating your boiler, take account of the general 
safety instructions and the warning notes that appear 
before each action.

2.1.1 

Classification of warnings

The warning notes are classified in accordance with the 
severity of the possible danger using the following warning 
signs and signal words:

Warning signs

Signal 
word

Explanation

a

Danger!

Immediate danger to life or 
risk of
severe personal injury

e

Danger!

Risk of death from electric 
shock

a

Warning!

Risk of minor personal 
injury

b

Caution!

Risk of material or environ-
mental damage

2.1  Meaning of warning signs and signal words

2.1.2  Structure of warnings

Warning signs are identified by an upper and lower separat-
ing line and are laid out according to the following basic 
principle:

a

 Signal 

word!

Type and source of danger!

Explanation of the type and source of dan-
ger

 

>

Measures for averting the danger

2.2  

Intended use

The Vaillant ecoTEC pro boilers are state-of-the-art appli-
ances which have been constructed in accordance with rec-
ognised safety regulations. Nevertheless, there is still a risk 
of injury or death to the operator or others or of damage to 
the boiler and other property in the event of improper use 
or use for which it is not intended.
This boiler is not intended for use by persons (including 
children) having limited physical, sensory or mental capaci-
ties or who have inadequate experience and/or knowledge, 
unless supervised by a person responsible for their safety 
or who has been given instructions from them as to how to 
operate the boiler.
Children must be supervised to ensure that they do not 
play with the boiler. 
The boiler is intended as a heater for closed hot water/cen-
tral heating installations and for  hot water generation. 
The use of the ecoTEC pro in vehicles, such as mobile 
homes and caravans, is not classed as intended use. Units 
that are not classed as vehicles are those that are installed 
in a fixed and permanent location and that do not have any 
wheels (fixed installation).
Any other use, or use beyond that specified, shall be con-
sidered as improper use. Any direct commercial or indus-
trial use is also deemed to be improper.
The manufacturer or supplier is not liable for any damage 
resulting from such use. The user alone bears the risk. 
Intended use includes the following:

 

– observing the included operating, installation and main-

tenance instructions for the Vaillant product and any 
other parts and components of the system

 

– installing and fitting the appliance in accordance with the 

boiler and system approval

 

– complying with all of the inspection and maintenance 

conditions listed in the instructions.

Caution!

Any misuse is forbidden.

Summary of Contents for ecoTEC pro

































Reviews: