6
3
1
2
Fig. 7
EC_Regler_(24h_7d)_013/0
•
Release time clock blanking plate (1,
fig. 7) from the control box by pushing
the retaining clips (2, fig. 7) down. The
time clock blanking plate can now be
pivoted forwards on
locating lugs (3, fig. 7) and removed.
•
Fit the time clock by first passing the
connecting lead through the hole left
by the time clock blanking plate. Insert
time clock locating lugs (3, fig. 7) into
control box and pivot upwards to
locate onto retaining clips.
(Note: The ribbon cable is supplied with
two plug in connectors. Always utilise
the connector nearest to the timer.
The plug at the end of the cable is
required when the timer is used as a
spare part replacement for earlier
TURBOmax/ECOmax boilers).
Summary of Contents for ECOmax 824 E
Page 13: ...13...
