5
Installation Instructions
for Control Center VR 65
4 Installation
The Control Center can be wall-mounted near to the
DHW cylinder. The hot water and heating programs as
well as all required parameters are set at the VRT 360
or VRC 400. All heating circuit connections are made at
the Control Center using a ProE plug.
4.1 Installation
overview
Please check the following before installing the VR 65
Control Center:
- Read the installation instructions
- Check the scope of delivery
- Assemble the VR 65
- Carry out electrical installation
4.2
Scope of delivery
Using Table 4.1, check that all the components have been
delivered with the VR 65.
Pos.
Number
Components
1
1
Control Center VR 65
2
1
Standard sensor VR 10
3
1
Cable clamps (7 pcs.)
4
1
Bag of screws
Table 4.1 Scope of delivery of the Control Centers VR 65
4.3 Accessories
-
timeSWITCH 140
Digital 2-channel timer with daily/weekly program for
heating and hot water.
The timeSWITCH 140 can be plugged into the Vaillant
ecoTEC boiler.
There are three individually programmable time win-
dows per day for heating and hot water. The timer can
be set to run a weekly or a daily program.
By activating the calendar function, an automatic
summer/winter changeover is activated.
-
VRT 360
Digital room temperature thermostat with daily/weekly
program for time and temperature control of heating
and hot water.
Designed for wall mounting.
There are three individually programmable time win-
dows per day for heating, hot water and a hot water
circulation pump. Different target room temperatures
can be set for each time window.
The thermostat can be set to run a weekly or a daily
program.
By activating the calendar function, an automatic
summer/winter changeover is activated.
-
VRC 400
Digital weather-dependent control with daily/weekly
program for time and temperature control of heating
and hot water.
Designed to plug into the Vaillant ecoTEC boiler or for
wall mounting.
Set the heating curve to adjust the flow temperature
to suit the heat requirement of the building. Optimises
the flow temperature to the prevailing weather condi-
tions.
There are three individually programmable time win-
dows per day for heating, hot water and a hot water
circulation pump. Different target room temperatures
can be set for each time window.
The control can be set to run a weekly program or a
daily program.
By activating the calendar function, an automatic sum-
mer/winter changeover is activated.
Caution!
Do not use a VRT 360 or VRC 400 in combina-
tion with an additional room temperature ther-
mostat e.g. VRT 30 due to the impact this may
have on the operation of the VRT 360 or VRC
400.
Installation 4
Summary of Contents for Control Center VR 65
Page 2: ......
Page 12: ...00 2000 7476_02 GB 11 2005 ...
