Flat roof fitting and installation 5
0020100571_03 auroTHERM, auroTHERM plus Installation manual
41
2
1
▶
Install the two plugs with vent openings on the other side
of the collector field at the top and bottom of the collector
(
(1)
and
(2)
).
▶
Secure the two plugs with the clamps (
(1)
and
(2)
).
▶
Connect the collector flow and return to the system with
the connection tubes.
▶
Check the connections for tightness.
Conditions
: Number of collectors:
≥
6
2
1
▶
Insert the return (inlet) on one side in the lower lateral
opening
(2)
.
▶
Secure the return with the clamp
(2)
.
▶
Install the first plug with vent opening at the top lateral
opening
(1)
.
▶
Secure the first plug with the clamp
(1)
.
2
1
▶
Insert the flow (outlet with opening for collector sensor)
diagonally opposite into the top lateral opening
(1)
.
▶
Secure the flow with the clamp
(1)
.
▶
Remove the red plug from the opening for the collector
sensor.
▶
Insert the
VR 11
collector sensor into the opening
(1)
.
▶
Use a cable tie to secure the
VR 11
collector sensor
against slipping out.
▶
Install the second plug with vent opening at the lower
lateral opening
(2)
.
▶
Secure the second plug with the clamp
(2)
.
▶
Connect the collector flow and return to the system with
the connection tubes.
▶
Check the connections for tightness.
5.3
Completing and checking the installation
5.3.1
Using the customer service card
1.
Remove the packaging with the serial number sticker
from the transport packaging of the collector.
2.
Remove the serial number sticker from the packaging.
3.
Remove the customer service card from the hydraulic
installation set.
1.
2.
au
ro
TH
ER
M
au
ro
TH
ER
M
au
ro
TH
ER
M
au
ro
TH
ERM
au
ro
THE
R
M
au
ro
THE
R
M
3.
4.
au
ro
THE
R
M
au
ro
TH
ER
M
au
roT
H
ER
M
au
ro
TH
ER
M
au
ro
THE
R
M
au
ro
THE
R
M
1
2
3
4
5
6
4.
Stick the sticker onto the first field in the customer ser-
vice card.
5.
Secure the customer service card in an easily visible
place near the solar system cylinder.
