Care and maintenance
Operating and installation instructions 0020248975_01
39
8
i
Note
After inserting the batteries, the
product first runs through a selftest
for approx. two seconds. Initialisa-
tion then takes place.
5. After inserting the batteries, observe
the flashing sequence of the signal LED.
– Self-test successful: Signal LED lights
up orange first and then green.
6. Push the product in the clip-on frame-
back onto the mounting plate.
8.2.1 Risk of death caused by
unsuitable batteries
a
Danger!
Risk of death caused by
unsuitable batteries!
If batteries are replaced with the
wrong type of battery, there is a
risk of explosion.
