Installation 5
0020200969_04 Installation manual
25
5.5.3.3 Installing the ridge tile terminal
1
1.
Install the ridge tile in accordance with the specifica-
tions from the tile manufacturer.
2.
Insert the ridge tile terminal into the ridge tile.
3.
Align the ridge tile terminal in such a way that the two
fixing tabs
(1)
are at a right angle to the course of the
ridging. This ensures that the combustion air can be
extracted from between the ridge tile and the air hood
above the ridge tile.
1
2
4.
Bend the two fixing tabs
(2)
on one bar
(1)
.
5.
Use nails or screws to secure the fixing tabs.
6.
Install the boiler (
→
Installation instructions for the
boiler).
7.
Install the extensions. (
→
Page 28)
8.
Install the 45° elbow. (
→
Page 31)
9.
Install the 45° elbow. (
→
Page 31)
10. Connect all of the disconnection points with air clamps.
(
→
Page 37)
11. Connect the ridge tile terminal and the boiler to exten-
sions and elbows.
5.5.4
Installing the vertical roof duct, 80/125 mm
diameter
5.5.4.1 Scope of delivery article number 303200
(black)
1
2
3
4
1
Vertical roof duct
2
Adaptor (air) for
110/125 diameter
3
Fixing bracket
4
70 mm air-pipe collar
5.5.4.2 Installing the pitched-roof duct
20-50°
1
2
3
1.
Determine the installation site of the roof duct in such a
way that there is sufficient distance behind the product
in order to connect the product to the heating installa-
tion.
2.
Insert the roof tile
(2)
.
3.
Insert the roof duct
(1)
through the roof tile from above
and push it down until it is flush.
4.
Align the roof duct vertically.
5.
Secure the roof duct to the roof construction using the
fixing bracket
(3)
.
6.
Connect the roof duct to the product using extensions,
elbows and, if required, a sliding sleeve.
7.
Alternatives 1 / 2
Conditions
: Roof duct with extension
▶
Install the extensions. (
→
Page 28)
▶
Install the 45° elbow. (
→
Page 33)
▶
Install the 87° elbow. (
→
Page 35)
▶
Install the sliding sleeve. (
→
Page 27)
▶
Connect all of the disconnection points with air
clamps. (
→
Page 37)
