vaetrix ETG Series, User Manual

Page: 1 / 32

Vaetrix ETG Series User Manual
•
Table of Contents
Operation and Quick Start Guide 2-3
Safety 4
Admin 5-8
Alarms 9
Bargraph 10
Clock 11
Damping and Datalogging 12
Datalogging 13
Display 14-15
Leak Test and Min/Max 16
Sensor 17
Snapshot 18
Tare 19
Units 20
Data Management Application 21-23
Specifications 24-27
Range Options 28-29
Model Configurator 30
Range and Resolution 31
Service and Warranty 32
•
Introduction
Thank you for choosing the Vaetrix Test Gauge. Vaetrix is
engineered by individuals that have been in the process
control industry for well over twenty years. We take pride in
the fact that our products are designed and manufactured in
the USA. The gauge itself is backed by an industry leading
four-year warranty. Our products are designed and built to
take abuse. We would have it no other way.
The only way we can get better is by listening to you, the
customer. If you have any comments or suggestions feel free
to send us an email at sales@vaetrix.com or call at 888-797-
3740.
•
Brief Overview
The gauge is powered by 3 AA alkaline batteries that provide
over 1000 hours of continuous use. To replace the batteries
just remove the two screws located in the battery door. The
gauge is sealed to meet IP-65 so make sure the battery door
screws are tight. Communications for datalogging and
downloads is handed by USB. A standard USB to Micro B
cable will work. For further details on all important
measurement parameters consult the specifications section
in the manual.
1